User's Manual
Table Of Contents
- Contents
- Description
- 1 Open the back cover using the notch located at the bottom of the phone. Take out battery if already installed.
- 2 Open the metallic lock, slide the SIM card into the card holder with fold face down and cut corner, close the metallic lock.
- 3 Place the battery by positioning first the bottom of it, as shown on the battery.
- 4 Place the back cover, clicking in first the upper part then the lower part.
- Idle Screen
- Quick start
- Using your phone
- Phonebook
- Messages
- Camera
- My Documents
- Music
- WAP
- Games and Tools
- Settings
- Time Manager
- Technical features
- Certification and safety information for the United States and countries using FCC standards
- Certification and safety information for Europe and countries using CE standards
- For customers in the United States
- For customers outside the United States
- End User Licence Agreement (EULA), for the software
- JAVATM
- Troubleshooting
- Index
28 Messages
If you do not want to use
T9 mode
, you can switch to ABC mode
pressing
(long press). The
ABC mode
allows you to type
letters: press one key several times to display the letter you want
(for example: press the
2
key twice to display
B
).
Note
:
To change the language in T9 mode: through the menu or long
press the
key.
Upper case/Lower case/Figures
A short press on switches the text to upper case, lower case
or figures.
Punctuation characters
Punctuation characters are obtained by pressing the
1
key (except
in
123
mode), or with the help of
Insert
mode (fast access by briefly
pressing
).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key
supporting the non-accented character repeatedly.
Saving the message
- Exit the edit directly, the edited message is saved in the drafts
automatically, it will display when you enter next time.
- Select
Save as/Draft,
if you do not want to send the message
immediately or if you want to send it several times. It is saved in
the
Drafts
menu.
or
- Select
Save as/Template
to use it again as a template. It is saved
in the
Templates
menu.
Sending the message
- Once the text entered, press the navigator or press [
Options
] and
select
Send to
.
- Enter the receiver’s number or take it in your phonebook pressing
[
Options
] then selecting
Contacts
.
- You also can select a contacts list in your phonebook.
287244723_my421Z FCC_EN.book Page 28 Wednesday, September 3, 2008 1