User's Manual

WAP (depending on model) 33
- Inbox: this menu allows you to consult messages sent by the
Internet site.
-
Save items: is used to save a WAP site multimedia item (option).
- Reload: refreshes the current page.
- Reset cache: clears the stored information on previous logons.
-
Advanced…: offers the following advanced settings
• Configuring parameters
• Show URL
• Logoff
• Circuit message (if user can confirm each logon)
• Security (is used to access information on making WAP
connections secure).
-
About…: information on the browser.
-
Exit: returns to the phone's home page.
Configuring WAP parameters
Select the Advanced… menu, then the configuration menu.
Choose from the sub-menus offered:
Logon parameters is used to select or modify your access
provider's logon parameters or configure the parameters of other
access providers.
The active access service is preceded with a start.
Configuration of GSM and GPRS parameters (depending on
model):
All information to be entered in the parameters are provided by your
operator or access provider.
- Choose desired access service, then press
Choice .
- Enter title of service and accept.
- Enter Internet address of home page and accept.
- Enter parameters of preferred logon:
• GPRS otherwise GSM
(by default): the logon to WAP services
uses the GPRS as a priority. However, in the event of
unavailability of the GPRS network, the GSM network is used
to establish the link.
• GPRS
: the logon to WAP services uses the GPRS network
exclusively.
252725318_my200L-201L-202L_TWIN_lu_en.book Page 33 Vendredi, 26. mai 2006 9:30 09