User's Manual

33
Directory
Activate the Call Groups function If you want the characteristics of the groups to apply to each call:
-Go into Directory / Directory menu / Call groups .
- Choose
Activate groups .
- Tick the box and validate.
The calls received from contacts who do not belong to a Call group use the
parameters provided in the Ringing and beeps menu.
Available memory To ascertain the number of groups which can still be created:
-Go into Directory / Directory menu / Call groups / Group menu .
- Choose
Available memory .
The first number shows the number of groups which can still be created, and
the second shows the maximum number of groups.
Looking up a group Select the group to be looked up and press OK .
Choose See group . The screen presents the name, the icon, and the choice
of vibrator mode of the group.
If there are contacts attached to this group, press the righthand key to
view the list of these ones.
Modifying a group Select the group to be modified, and press OK .
Choose Modify .
Carry out the wanted modifications.
Validate by OK .
Deleting a group Select the group to be deleted, and press OK .
Choose Delete .
Confirm by OK .
Directory menu enables you to sort the stored numbers by name or location;
for the latter, the free locations are indicated in the list.
Sorting
If call groups are not enabled, you
cannot attach correspondents to
groups.
251873962_myX-1a Twin_lu_en.book Page 33 Vendredi, 7. janvier 2005 3:00 15