User's Manual
Table Of Contents
- Conformance Document
- FCC Conformance Document
- Safety Information for Wireless handled phones
- Functions at a glance
- Menus at a glance
- Glossary
- Presentation of the phone
- Getting started
- Initial communication - Hands-free mode
- Directory
- Messages
- Calls
- Ringing tones
- Settings
- Security
- Accessories
- WAP (depending on model)
- Games
- Available accessories
- Technical Characteristics
- Care and safety information
- SAR at the ear (W/kg)
- SAR worn of the body (W/kg)
- Version
- FCC ID
- GSM 850
- PCS 1900
- GSM 850
- PCS 1900
- Problem - Situation
- Actions
- Customer care
23
Getting started
Switch off your phone and disconnect the charger.
The SIM card is inserted beneath the phone’s battery.
Turn your phone over and slide the backcatch up.
Take off the back cover, starting from the bottom.
Take out the battery.
Slide the card along the base beneath the retaining plate, with the gold
coloured sections facing towards the phone and the cut-off corner lined up to
match the drawing on the phone.
Place the battery by first inserting the upper section into the opening.
Replace the back cover, clicking in first the upper part then the lower and
pushing the backcatch downwards into the locked position.
Installing the SIM card and the battery
1
2
3
4
5
6
1
2
3
4
5
6
251873962_myX-1a Twin_lu_en.book Page 23 Vendredi, 7. janvier 2005 3:00 15