Unit of Saint Christophe TMO +$5':$5( 0$69 7287(6 9(56,216 Réf. : SCT TMO MASV3 SPEC 30 Revision: I Réf. sec. : 2x xxx xxx – x Date : 02/11/04 Page 1 sur 46 &2 [[ ;6 VSHFLILFDWLRQ Type of document : SCT TMO MASV3 SPEC 030 I spec SPECIFICATIONS Document . All rights of reproduction and disclosure reserved. agrément triband.doc This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
&RQFOXVLRQ RU VXPPDU\: This document gives an overview of the CO2xx/XS200 module: a miniature, single-side, BGA board, tri-band GSM/GPRS module, ready for integration in mobile application like vehicle-mounted or vending machines … It describes the main functionalities of this module as well as the electrical interfaces, the mechanical specification (dimension, form…) and the electrical specification of the module. +$5':$5( &2 [[ ;6 VSHFLILFDWLRQ )RU PRELOH DSSOLFDWLRQV Ref.
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 14/09/04 &2 ;; ;6 *60 *356 75, %$1' %&( 02'8/( )25 02%,/( $33/,&$7,216 Document . All rights of reproduction and disclosure reserved. Page 1 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 14/09/04 ([WHUQDO FRPSDQLRQ FKLS LQWHUIDFH 3.8.1 I2S interface ............................................................................................................................... 17 3.8.2 Parallel interface to companion chip ..........................................................................................
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 14/09/04 9%$&.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 DRAFT • GSM 05.10: "Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronisation". Version 6.6.0. • GCF-CC (V.3.12.0) and GT.01. • NAPRD.03 (V.2.10.1).
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec.
DRAFT General purpose I/Os pin GPRS GSM/DCS certification GCF-CC PCS certification Multimedia objects download Document Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 4 I/O available on ball-out. SMG 31bis, Multi slot class 10, class B terminal, PBCCH support V.3.12.0 and GT.01 NAPRD.03 (V.2.10.1) Ring tones, wallpapers, icons, games, screen savers . All rights of reproduction and disclosure reserved.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 $8',2 The module supports the following voice codecs: • Half-Rate • Full-Rate • Enhanced Full Rate It manages an external handset microphone (MICIP/MICIN) and an external handset earphone (32 ohms HPP32/HPN32 and 6 ohms HPP8/HPN8) in differential mode. The bias voltage of the microphone is provided directly on MICIP/MICIN pins (1.5V).
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 ',63/$< 6HULDO LQWHUIDFH A serial interface is provided on the module to manage an external LCD (256 colours) through data input signal (DIMIW), data output signal (DOMIW), clock (CKMIW) and chip select (CSMIW1*). Power supply of the LCD (VRIO) is also provided through this interface. This interface could be used to manage one serial LCD or one melody chip (or other chipset using this interface).
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 DRAFT If specific LCD driver is used, the software would be provided by SAGEM, or at least the specific drivers will be integrated by SAGEM. In that case a specific quotation is required. 3DUDOOHO LQWHUIDFH WR /&' A parallel interface is provided on the module to manage an external LCD (up to 262K colours) with data bus (DLCD<0..
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 86% CO2xx/XS200/XS200 provides an USB 1.1, slave only, with the following signals: differential data (USB_DP, USB_DM) and +5V input power supply (VCUSB). $17(11$ The antenna connexion is prived through the ’antenna’ ball. This is a 50ohm RF connexion and as such must be connected to the antenna via a proper 50ohm line; the RF ground is provided by the 5 balls surrounding the antenna ball.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 , & LQWHUIDFH A standard I2c interface is available on ball-out to send command to the video sensor. 3DUDOOHO LQWHUIDFH WR VHQVRU A dedicated parallel interface is provided on ball-out with 8 bits data bus (DCAM<0..7>), vertical synchronisation (VSCAM), horizontal synchronisation (HREF), input clock (PCLKCAM), configurable output clock (XCLKCAM), reset (RESETCAM), standby (STBYCAM).
Réf. : Rev. : Réf. sec. : Date : SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 DRAFT NB: The maximum capacitance acceptable on each signal of the parallel interface is 25pF (including copper line capacitance, connectors capacitance… ). Document . All rights of reproduction and disclosure reserved. Page 18 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 )LJXUH Parallel link read timing )LJXUH Parallel link write timing Document . All rights of reproduction and disclosure reserved. Page 19 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 Single access: 'HVFULSWLRQ 7LPLQJ CPU frequency tcyc Chip Select Valid tcsv NCS to Address valid tda Address hold from nCS tha NBHE, nBLE to nCS tdbe NOE to nCS tdoe Input data setup to nCS tsu Input data hold from nCS tho NCS to RnW tsrw RnW to nCS tdrw NCS to output data valid tdso Output data hold from RnW thd N= Wait State number 0LQ QV tcyc 0 5.5 0 Tcyc/2-tdrw 1.3 0 0D[ QV 1/Fcpu (N+1)tcyc 1.2 0.6 0.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 %/8( 7227+ 237,21$/ All the interfaces to connect a blue tooth chipset are provided. Only power supply is not included. Blue tooth chipset management is optional.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 8$57 LQWHUIDFH See UART interface from the V24 interface or from the IRDA interface. &ORFN 26MHz clock could be used for clock input of blue tooth component (please note: 13MHz clock is also available on CO2xx/XS200 ball-out but is not compliant with blue tooth chipsets features).
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 95,2 +2.8V output is available on external pin of the module and could supply +2.8V external components (current capability 10mA in active mode). This interface includes main protections. 9EDFNXS External Backup could be supply through the VBACKUP input (from 2.2V to 3.2V). A internal mechanism is present to charge the backup battery.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 9LEUDWLQJ GHYLFH Vibrating device control is provided but external transistor is needed. VBAT VIB+ VIB- CMDVIB )LJXUH 9LEUDWLQJ GHYLFH FRQQHFWLRQ Document . All rights of reproduction and disclosure reserved. Page 24 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 23(5$7,1* 02'(6 Power_off No supply Power_on Standby Power_off OFF Wake-up Switch_off Switch_on Active Sleep (automatic) Switch_off )LJXUH 2SHUDWLQJ PRGHV VWDWH GLDJUDP 02'(6 '(6&5,37,21 1R VXSSO\ VBAT < 3.2V and VBACKUP < 2.2V. All functions and power supplies are OFF: VRIO = 0. 2)) VBAT > 3.2V or external Backup VBACKUP > 2.2V. The RTC only is running (32kHz).
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 3RZHUBRII The battery is removed from the module (and/or VBACKUP is switched OFF). 6ZLWFKBRQ The battery is already connected. The module starts when ON key is pressed or a charger is connected or when wake up occurs. 6ZLWFKBRII The battery is connected. The software is turning off of the module when OFF key is pressed and VBAT > 3.2V.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 %$// 287 The following list of signals could change.
Réf. : Rev. : Réf. sec. : Date : NC TEST VBAC RST KUP 4 GND LEDG INT1 VRIO ADC2 5 6 7 8 GND CSMI ENLE W2* D GND NC DOMI CKMI W W GND TDOA NALO NC GND GND GND GND GND GND GND HSMI CIN GND CSYN CSCL C K GND GND GND GND GND MICIN GND GND CLK32 GND TDIAN GND K ALO GND GND GND GND MICIP CSMI W1* GND GND GND GND TCK GND GND GND GND GND GND GND GND GND GND DIMIW GND SIMVC SIMRS SIMCL SIMIO K T C GND Document GND GND GND GND GND .
Réf. : Rev. : Réf. sec. : Date : DRAFT 6LJQDO QDPH DAIRST DAIOUT DAIIN DAICLK DIMIW DOMIW CKMIW CSMIW1* CSMIW2* ,2 W\SH Input Output Input Input Input Output Output Output Output ENLED Output LEDR LEDG R1 R2 R3 R4 R5 R6 C6 C5 C4 C3 C2 C1 OUI* SIMVCC SIMRST SIMCLK SIMIO SIMCD HSMICIP HSMICIN Output Output Input Input Input Input Input Input Output Output Output Output Output Output Input Output Output Output In/output Input Input Input HSOL HSGND HSOR MICIP MICIN HPP32 HPN32 HPP8 HPN8 CMDVIB Out
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 (/(&75,&$/ 63(&,),&$7,21 VOH VOL VIH VIL High level output voltage Low level output voltage High level input voltage Low level input voltage 9%$7 The module is supplied through the VBAT signal with the following characteristics: 0D[ 7\S 0LQ 1DPH 3DUDPHWHU DC 4.615 4.
Réf. : Rev. : Réf. sec. : Date : DRAFT 95,2 0LQ 7\S 0D[ 2.70V 2.80V 2.90V 2.70V 2.80V 3.00V - - 10mA - - 0.5mA - 10µs - 6LJQDO Voltage level (activ mode) Voltage level (sleep mode) Current capability Active mode Current capability Sleep mode Rise time SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 5HPDUNV '$, ,17(5)$&( DAIRST, DAIIN, DAICLK and DAIOUT have the following characteristics: 5HPDUNV 6LJQDO 9 9 9 9 0D[ 0LQ 0D[ 0LQ +3.2 +2.03 +0.8 -0.
Réf. : Rev. : Réf. sec. : Date : DRAFT 6LJQDO Ton (ms) VIL VIH 0LQ 0.7*VBAT 0D[ 0.3*VBAT - 7\S 32,31 - SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 5HPDUNV PU 9,%5$7,1* '(9,&( &21752/ CMDVIB have the following characteristics: 6LJQDO 9 9 9 9 0LQ 0D[ 0LQ +2.32 +0.59 CMDVIB ICMDVIB max = 2mA 0D[ - 5HPDUNV PD 9 RXD1, TXD1, CTS, RTS, DCD, DSR, DTR and RI have the following characteristics: 5HPDUNV 6LJQDO 9 9 9 9 0D[ 0LQ 0D[ 0LQ PU 100K +3.
Réf. : Rev. : Réf. sec. : Date : DRAFT Input Output 0D[ +0.8 +0.59 0LQ -0.5 - 0D[ +3.2 - 0LQ +2.03 +2.32 SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 IO5,6,7: programmable PD IO11: programmable PU Iout max = 2mA &/2&.6 CLK26M and CLK32K have the following characteristics: 6LJQDO 9 9 9 9 0D[ 0LQ 0D[ 0LQ +2.32 +0.59 CLK13M 1,32 0,297 CLK32K 6LJQDO 9 9 5HPDUNV 9 9 2V 0.5V CLK26M 5HPDUNV 3$5$//(/ ,17(5)$&( )25 &203$1,21 &+,3 DPROC<0..
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 86% ,17(5)$&( USB_DM, USB_DP, VCUSB have the following characteristics: 6LJQDO 9 9 9 9 0D[ 0LQ 0D[ 0LQ +3.6 +2.45 +0.93 -0.5 Input USB_DM, USB_DP +2.8 +0.682 Output USB_DM, USB_DP 6LJQDO VCUSB (V) 0LQ 4.0 5HPDUNV PU PU 0D[ 5.5 00& ,17(5)$&( DMMC<0..
Réf. : Rev. : Réf. sec. : Date : DRAFT +2.32 +0.59 Output MCSIDO, MCSICLK, MCSISYNCH NB: a pull down as to be added to MCSIDI and MCSICLK SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 , 6 ,17(5)$&( CSYNC, CSCLK, CDI, CDO, CRESET have the following characteristics: 5HPDUNV 6LJQDO 9 9 9 9 0D[ 0LQ 0D[ 0LQ PD 100K +3.2 +2.03 +0.8 -0.5 CDI +3.2 +2.03 +0.8 -0.5 Input CSYNC, CSCLK +2.32 +0.
Réf. : Rev. : Réf. sec. : Date : DRAFT +2.03 +0.8 -0.5 ITDATA +2.03 +0.8 -0.5 INT1 Pulse duration in functional mode: 77ns min. 9%$&.83 6LJQDO VBACKUP PU PU +3.2 +3.2 0LQ 0D[ +2.2V +3.2V SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 5HPDUNV If no external backup is supplied, VBACKUP has to be connected to VBAT. With external BACKUP: - if VBAT < VBACKUP, internal RTC is supplied by VBACKUP. - if VBAT > VBACKUP, internal RTC is supplied by VBAT.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 0(&+$1,&$/ 63(&,),&$7,21 )LJXUH &2 [[ ;6 FRPSRQHQW VLGH Document . All rights of reproduction and disclosure reserved. Page 40 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 )LJXUH &2 [[ ;6 EDOORXW VLGH Document . All rights of reproduction and disclosure reserved. Page 41 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 )LJXUH &2 [[ ;6 GLPHQVLRQV Document . All rights of reproduction and disclosure reserved. Page 42 This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product without notice.
Réf. : Rev. : Réf. sec. : Date : DRAFT SCT TMO MASV3 SPEC 30 H 2x xxx xxx – x 12/05/04 $11(;( 6LJQDO QDPH DAIRST DAIOUT DAIIN DAICLK DIMIW DOMIW CKMIW CSMIW1* CSMIW2* ENLED LEDR LEDG R1 R2 R3 R4 R5 R6 C6 C5 C4 C3 C2 C1 OUI* SIMVCC SIMRST SIMCLK SIMIO SIMCD HSMICIP HSMICIN HSOL HSGND HSOR MICIP MICIN HPP32 HPN32 HPP8 HPN8 CMDVIB RI DSR DCD ,2 W\SH Digital bi directional buffer (IDI041/OUK431) Digital bi directional buffer (IDI041/OUK431) Digital bi directional buffer (IDI041/OUK431).
Réf. : Rev. : Réf. sec. : Date : DRAFT DTR CTS RTS TXD1 RXD1 TXD2 RXD2 TXIR RXIR CMDIRDA INT1 SCLI2C SDAI2C INTI2C CHARGEUR LEDC TESTRST ITDATA DPROC<0> DPROC<1> DPROC<2> DPROC<3> DPROC<4> DPROC<5> DPROC<6> DPROC<7> DPROC<8> DPROC<9> DPROC<10> DPROC<11> DPROC<12> DPROC<13> DPROC<14> DPROC<15> RWPROC* OEPROC* CSPROC1* APROC<1> APROC<2> APROC<3> DLCD<0> DLCD<1> DLCD<2> DLCD<3> DLCD<4> DLCD<5> DLCD<6> DLCD<7> ESTRBLCD CS0LCD* Digital bi directional buffer (IDI091/OUI831).
Réf. : Rev. : Réf. sec.
Réf. : Rev. : Réf. sec. : Date : DRAFT IO5 IO6 IO7 IO11 VBAT VRIO VBACKUP ANTENNE TCK TMS TDIDIGIT TDODIGIT TDIANALOG TDOANALOG BSCAN* EMU0* EMU1* Digital bi directional buffer (IDG091/OUI431/PE1001) Digital bi directional buffer (IDG091/OUI431/PE1001) Digital bi directional buffer (IDG091/OUI431/PS1001) Digital bi directional buffer (IDG091/OUO431/PS1001) Power supply input Power supply output Power supply input Analog bi directional HF Digital input buffer (IDI091/ PE0201).
