Instruction Manual
Réf. : SCT TMO MASV3 SPEC
30
Rev. : H
Réf. sec. : 2x xxx xxx – x
Date : 12/05/04
DRAFT
Document
. All rights of reproduction and disclosure reserved.
Page 25
This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product
without notice.
23(5$7,1*02'(6
)LJXUH
2SHUDWLQJPRGHVVWDWHGLDJUDP
02'(6'(6&5,37,21
1RVXSSO\
VBAT < 3.2V and VBACKUP < 2.2V.
All functions and power supplies are OFF: VRIO = 0.
2))
VBAT > 3.2V or external Backup VBACKUP > 2.2V.
The RTC only is running (32kHz). All other functions and power supplies are OFF: VRIO = 0.
$FWLYH
The module is active: all the functions are running and all the power supplies are ON and in full power mode
(full consumption).
VRIO = +2.8V
6WDQGE\
The module is in standby mode: the power supplies are ON and in low power mode.
This mode is typically use when the module is connected to the network and checking periodically if there is
an incoming call.
75$16,7,216'(6&5,37,21
3RZHUBRQ
A battery is connected to the module with VBAT > 3.2V (and/or VBACKUP is switched ON).
Wake-up
Sleep (automatic)
Switch_off
Switch_on
Switch_off
Power_on
Power_off
Power_off
No supply
OFF
Active
Standby