Installation Instruction

Ref : SCT TMO MOD SPEC 662
Rev.: B
Ref. sec. :
Date:
18/11/2004
Document

. All rights of reproduction and disclosure reserved.
MO2XX module – Confidential under NDA
Page 4/67
6.15 Clocks
................................
................................
................................
................................
...............
35
6.16 JTAG interface
................................
................................
................................
................................
.
35
7. ENVIRONMENTAL SPECIFICATION
................................
................................
.........
36
8. MECHANICAL SPECIFICATION
................................
................................
................
37
PHYSICAL DIMENSIONS
................................
................................
................................
............................
37
8.2 TERMINAL ASSIGNMENTS
................................
................................
................................
.............
40
8.2.1. 120 pins connector
................................
................................
................................
......................
40
8.2.1.1. MO2XX connector
................................
................................
................................
..................
40
8.2.1.2. Mother board connector
................................
................................
................................
..........
41
8.2.2. MO2XX Antenna connector
................................
................................
................................
.........
42
8.2.3. Battery connector
................................
................................
................................
........................
43
ANNEX 1 : IO DESCRIPTION
................................
................................
...........................
44
ANNEX 2 : HARDWARE POWER MANAGEMENT
................................
..........................
48
Different strategies
................................
................................
................................
................................
....
48
1. Interface specification.
................................
................................
................................
.......................
48
1.1 Management by DCE alone.
................................
................................
................................
...
48
1.3.1. Signals.
................................
................................
................................
...............................
49
1.3.2. Signals and states.
................................
................................
................................
..............
50
Logical and electrical levels:
................................
................................
................................
..............
51
1.3.3.1. Transition tables.
................................
................................
................................
..............
51
1.3.3.2. Command signals.
................................
................................
................................
...........
51
1.3.3.3. Transition from OFF to ON Active.
................................
................................
..................
52
1.3.3.4. Transition from ON Active to ON Sleep.
................................
................................
.........
52
1.3.3.4.1. Initiated by DTE.
................................
................................
................................
........
53
1.3.3.4.2. Initiated by DCE.
................................
................................
................................
.......
54
1.3.3.4.3. Transitory states.
................................
................................
................................
.......
55
1.3.3.5. Transition from ON Sleep to ON Active.
................................
................................
.........
56
1.3.3.5.1. Initiated by the DCE.
................................
................................
................................
.
57
1.3.3.5.2. Initiated by DTE.
................................
................................
................................
........
57
1.3.3.6. Transition from ON Sleep to OFF.
................................
................................
..................
58
1.3.3.7. Transition from ON Active to OFF.
................................
................................
..................
59
1.3.3.8. Reset
................................
................................
................................
...............................
61
1.3.3.8.1. Initiated by the DCE.
................................
................................
................................
.
62
1.3.3.8.2. Initiated by the DTE.
................................
................................
................................
..
63
1.3.3.9. Timeout.
................................
................................
................................
...........................
63
ANNEX 3 : DATA/COMMAND HARDWARE MULTIPLEXING
................................
.........
64
1. Hardware multiplexing
................................
................................
................................
.......................
64
1.1. External interfaces
................................
................................
................................
......................
64
1.2. Capability requirements
................................
................................
................................
.............
64
1.2.1. Logical and electrical levels
................................
................................
................................
64
1.2.2. Hardware protocol
................................
................................
................................
...............
64
1.2.3. State diagram
................................
................................
................................
......................
65
1.2.4. Transition (1): Command -> Data
................................
................................
.......................
65
1.2.5. Transition (2): Data -> Suspended Data
................................
................................
.............
65
1.2.6. Transition (3): Suspended Data -> Data Mode
................................
................................
...
66