User's Manual

s
e
Centre de Saint Christophe - URD 37
TELEPHONIE MOBILE
MOBILE PHONES
Ref. : SCT TMO MASV2 SPEC 14 M
Date : 04/03/03
E All rights reserved. Reproduction and disclosure prohibited Page 34
MO130 module for mobile applications
This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product
without notice.
A<3> In/output Address bus 68
A<4> In/output Address bus 67
A<5> In/output Address bus 66
A<6> In/output Address bus 65
OE* Output Output Enable 30
RW* Output Read / Write 29
CS2 Output Chip select 2 31
CS3 Output Chip select 3 28
CLK13M Output 13MHz clock digital output 16
CLK32K Output
Clocks
32KHz clock digital output 9
ADC1 Input Battery type detection 11
DAC Output
ADC/DAC
Digital to analog converter 13
DISPI Input Data input 120
DOSPI Output Data output 102
CLKSPI Output Clock SPI 108
ENSPI1 Output
SPI bus
SPI enable 119
VBAT Input +3.6V battery power supply Bat. Conn. 1
V56 Output +5.6V output power supply 74
VRDBB Output +1.8V output power supply 3
VRDBBDC Input +1.8V DCDC output 1
VRIO Output +2.8V output power supply 2
VBACKUP Input
Power supply
Backup input 12
GND Ground Ground 8,10,15,17,48
,51,54,58,60,
61,64
Bat. Conn 2
OUT_ANT Output Antenna output Ant. conn.
TCLK Input JTAG Test point
TMS Input JTAG Test point
TDI Input JTAG Test point
TDODIGIT Output JTAG Test point
TDIANALOG Input JTAG Test point
TDOANALOG Output
JTAG interface
JTAG Test point
NBSCAN Input Boundary scan JTAG Test point
NEMU0 Output For debug Test point
NEMU1 Output For debug Test point