User's Manual

s
e
Centre de Saint Christophe - URD 37
TELEPHONIE MOBILE
MOBILE PHONES
Ref. : SCT TMO MASV2 SPEC 14 M
Date : 04/03/03
E All rights reserved. Reproduction and disclosure prohibited Page 31
MO130 module for mobile applications
This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product
without notice.
4.2 TRANSITIONS DESCRIPTION
4.2.1 Power_on
A battery is connected to the module with VBAT > 3.2V (and/or VBACKUP is switched ON).
4.2.2 Power_off
The battery is removed from the module (and/or VBACKUP is switched OFF).
4.2.3 Switch_on
The battery is already connected. The module starts when ON key is pressed or a charger is connected or
when wake up occurs.
4.2.4 Switch_off
The battery is connected. The software is turning off of the module when OFF key is pressed and VBAT >
3.2V.
4.2.5 Wake up
The actions to go from standby mode to active mode are:
- Charger connection
- Key pressed
- Incoming call
- Data cable connection
- V24 activity