User's Manual

s
e
Centre de Saint Christophe - URD 37
TELEPHONIE MOBILE
MOBILE PHONES
Ref. : SCT TMO MASV2 SPEC 14 M
Date : 04/03/03
E All rights reserved. Reproduction and disclosure prohibited Page 27
MO130 module for mobile applications
This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product
without notice.
Verify : ∆R
p
/ R
p
(20°C) < 0.315
Report have to be made by the supplier stipulating the bobbin and the enclosure temperature elevation .
3.14 ACCESSORIES
Accessories connection has to be defined more precisely.
With the MO130 module, the following accessories could be connected :
- a pedestrian stereo or non stereo hand-free kit
- a battery charger
- an automotive hand-free kit
These interfaces includes main protections.
3.15 MANUFACTURER MMI CUSTOMIZATION
The MO130 module already includes built-in MMI. This MMI can be customised by customer with SAGEM
help.
Options for customisation include :
• custom bitmaps and animations (with pre-determined sizes): start animation, menus animations,
icons…
• custom fonts (with pre-determined sizes)
• custom messages (provided they fit in the MMI design)
• custom screen-savers
• enabling or disabling some features
If more customisation is required, this has to be discussed with SAGEM.
As explained in other chapters, if a specific LCD or keyboard configuration is needed, SAGEM will take the
responsibility to develop the required software drivers. In case of already available drivers, SAGEM will take
the responsibility to integrate them in the software.
All these options are submitted to specific software development on SAGEM side. Therefore, MMI options
require separate, dedicated quotation.
3.16 OTHER FUNCTIONS
3.16.1 Flap
An interrupt pin is available on external pin of the module for the Open/closed detection of a clam mobile.
3.16.2 Buzzer
This interface is not provided at this time but could be included if requested.
3.16.3 Backlight
3.16.3.1 Red or Green LEDs
A current generator (BACKKEY) is dedicated to backlight of the LCD or the keyboard with the following
characteristics:
- Output voltage V
on
from 1.7V to 3.7V, 2.5V typ.