User's Manual
s
e
Centre de Saint Christophe - URD 37
TELEPHONIE MOBILE
MOBILE PHONES
Ref. : SCT TMO MASV2 SPEC 14 N
Date : 28/03/03
E All rights reserved. Reproduction and disclosure prohibited Page 8
MO130 module for mobile applications
This document contains information on a product under development. SAGEM reserves the right to change or discontinue this product
without notice.
the module has to be turned off before any
manipulation of the SIM card.
SIM slot
Not included on the module. Signals for the
management of the SIM card are provided on 120
pins connector.
Vibrator
Not included in the module. Controls are provided on
120 pins connector.
Network LED
Not included in the module. Controls are provided on
120 pins connector.
Keyboard / LCD backlight
Not included in the module. Controls are provided on
120 pins connector.
Audio up-link
2 differential inputs are provided for microphone
(accessories and handset)
Audio down-link
2 differential inputs are provided for earphone
(accessories and handset)
Flap open/closed detection
Dedicated interrupt input is provided on 120 pins
connector for the open/closed detection.
Keyboard interface
5x5 keyboard interface is provided on 120 pins
connector.
UART1 interface with flow control
Up to 115.2 Kbaud with autobauding.
Full flow control signals (+2.8V) are provided on 120
pins connector.
If a full compliant RS232 (+/-5V) serial interface is
needed:
The drivers (like MAX3232, ST3237CD, …) are not
included in the module and have to be added on the
main PCB.
A proven schematic to build the RS232 interface is
provided in application note.
IrDA interface or UART2 interface
Up to 115.2 Kbaud.
UART2 and IrDA are not multiplexed but could not be
used at the same time.
Data services GPRS, CSD, Fax
Supplementary services
Line identification, Call Waiting, Call Hold, Call
Forwarding, Multiparty, Closed User Group, Call
Barring, Advice of Charge, USSD
USB interface
Not integrated in the module.
It can be added by means of a dedicated micro-
controller with USB capabilities.
Melody chip interface
The melody chip is not integrated in the module but
the interface is provided (power supply, clock, audio,
serial link) on 120 pins connector.
Serial Interface
A serial interface is provided on 120 pins connector in
order to manage an external LCD and a chip melody.
Parallel Interface
A parallel interface (16 bits) is provided on 120 pins
connector (7 addresses, 2 chip select and OE, RW
signals are available).
Reset pin Available (reset of all the system including backup)
Power on pin Available
General purpose I/Os pin See chapter
GPRS
SMG 31bis, Multi slot class 8 (class 10 in future
versions), class B terminal, PBCCH support
WAP 1.2
GSM/DCS certification GCF-CC V.3.5.0 and GT.01