User's Manual
71
WAP
- Press on Details (lefthand key ).
The GPRS parameters to be entered are:
a user name,
a password,
the IP address of the WAP gateway: enter the IP
number using the central key @ (Next) then choose
Secure or Non secure.
APN: if no APN has been defined, press on Options
(lefhand key ) then Directory. Select an APN and
activate it or add an APN (give a name and validate).
The GSM parameters to be entered are:
a user name,
a password,
the IP address of the WAP gateway: enter the IP
number using the central key @ (Next) then choose
Secure or Non secure.
the call number,
the access mode (digital or analog).
Once all the parameters are entered, you can
activate the selected service.
- Confirm your choice with OK.
• Show URL which presents the current Internet
address.
• Disconnect which ends the communication (allows a
navigation whithout being connected).
• Circuit prompt which enables to activate or not the
connection confirmation message at each connection
attempt.
MYX-3p_EN-11WAP.p65 19/12/2002, 15:2471