User's Manual

70
WAP (depending on model)
Configuration of parameters
Advanced... menu: access to sub-menus:
• Connection settings which allow you to set the
parameters for several access providers
(depending on model). The current access service
has a star in front of it.
Configuration of WAP parameter
- Select the desired access service using the
scrolling arrows then press on Modify (lefthand
key ).
- Enter the name of the service then validate.
- Enter the internet address of the home page then
validate.
- Enter the connection settings.
- Press on Details (lefthand key ).
a user name,
a password,
the IP address of the WAP gateway: enter the IP
number using the central key (Next) then choose
Secure or Non secure.
the call number,
the access mode (digital or analog).
Once all the parameters are entered, you can
activate the selected service.
- Confirm your choice with OK.
All of the information to be entered in
the settings is supplied by your
operator or service provider.
MYX-1p_EN-11WAP.pmd 14/10/2003, 15:3670