User's Manual

Ringing tones

Setting the vibrator (depending on

model)

Using the scrolling keys, select one of the following

options: inactive vibrate, only vibrate, vibrate then

ring.

Validate by pressing the righthand key .

Selecting silent mode (depending on

model)

If you want the ringing tone of your phone to be

replaced by the vibrator and the beeps to be

suppressed (except for the alarm tone), tick the box

and validate by pressing OK.

You can also activate/deactivate the silent mode by

holding down the

∗ ∗

∗ key.

This mode is indicated by the symbol on the

screen.

Setting the beeps

Different controls are available:

Setting the keypad tones

Select the tone required using the scrolling arrows

and validate (press the righthand key ).

Setting the network tone

If you want your phone to give a warning beep when

it locates a network on which it can communicate:

Tick the box and validate by pressing OK.

Wherever you require your calls to

arrive discreetly, you can use the

vibrator or select the silent mode.

Silent mode is automatically

deactivated when the hands free car kit

is connected as well as when the

phone is switched on/off.

You can select the tones produced by

your keypad: Beep, DTMF (musical

keys) or non active tones (in this last

case, when you press your keyboard,

it does not make a noise).

MYX-1p_EN-07ringtones.pmd 14/10/2003, 15:3653