User's Manual

28 Data application
SERVICES AVAILABLE ON THE TERMINAL
ATA<CR> Answer a call.
ATH[0]<CR> Disconnect existing link.
ATS0=i<CR> Answer calls after ”n“ rings.
i = 0: no automatic off-hook.
ATBi<CR> Data rate selection:
ATB7 : Analogue modem 2400 (V22BIS)
ATB11 : Analogue modem 4800 (V32)
ATB13 : Analogue modem 9600 (V32)
ATB25 : UDI 2400 - ISDN call
ATB27 : UDI 4800 - ISDN call
ATB29 : UDI 9600 - ISDN call.
AT\N4<CR>
or RLP.
AT\N6<CR>
AT\N0<CR> Non RLP.
A/ Repetition of the previous line.
During a data call:
+++ Return to command mode (Allows to hang up using ATH as soon as
the modem has sent OK).
Note: The commands may be combined:
For example
ATE0V0<CR>
ATV0E0<CR>
ATE0<CR> then ATV0<CR>
are equivalent.
ZAMBUUUJO.p65 10/04/02, 18:4628