User's Manual

27
• Select the Command tab and fill it
as follows:
• Click on OK then on Close to
return to the window Line setup.
Select the modem created and the
serial port wanted then click on
OK.
• The application initializes the
modem and goes into waiting
state.
AT commands
Notation [-] = optional parameter
The following AT commands are handled by the phone:
ATE[0|1]<CR> Command echo:
0= off
1= on.
ATV[0|1]<CR> Answers to AT commands:
0= digital format
1= text format.
ATQ[0|1]<CR> 0= Answers to AT commands are sent to the computer.
1= Answers to AT commands are not sent to the computer.
ATD<number>[;]<CR>
or
ATDP<number>[;]<CR> Dialing.
or
ATDT<number>[;]<CR>
The characters for: ‘P’ or ‘p’ (pulse), ‘T’ or ‘t’ (tone), ‘W’ or ‘w’ (wait), ‘,’
(pause) are accepted and indifferent.
«;» at the end of the command, before <CR>, means: phone call (as
opposed to data call).
Data application
SERVICES AVAILABLE ON THE TERMINAL
ZAMBUUUJO.p65 10/04/02, 18:4627