User's Manual

24 Data application
SERVICES AVAILABLE ON THE TERMINAL
In the new window, check if the
parameters are correct (COM1,
19200). Click on Connection.
• Fill in the window as follows:
Data bits : 8
Parity : None
Stop bits : 1
• Click on Advanced… and fill in the
window as follows:
• Tick the box Use flow control for
Hardware.
Extra settings: &K3+CBST=7,0,1
• To close, click on OK, OK, OK,
Cancel.
Save under the chosen name (File
transfer, for example)
K4
ZAMBUUUJO.p65 10/04/02, 18:4624