User Manual

11
EN
Troubleshooting
PROBLEM WHAT TO DO
The Sage Smart
Tea Infuser
™
does
not switch on
•
Check the power plug is securely inserted into the outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a dierent outlet.
• Reset the circuit breaker if necessary.
• For additional safety the Sage Smart Tea Infuser
™
is tted with a thermal
cut out. In the event of severe overheating, the Sage Smart Tea Infuser
™
will automatically shut down to prevent further damage.
The Sage Smart Tea
Infuser
™
does not work
• Check the glass jug is securely positioned on the power base.
I cannot select a
certain function
• Certain features cannot be selected or changed during the heating
or brewing cycle. LED lights surrounding the buttons will indicate the
availability of the functions.
After boiling
water, bubbles
appear around the
temperature sensor
• This is normal for the functionality of the Sage Smart Tea Infuser
™
.
My tea tastes too
weak or too strong
• Perform a cleaning cycle as per instruction in the booklet.
• Follow the cleaning instructions in this booklet.
• A non-abrasive liquid cleanser or mild spray
solution may be used to avoid build-up of
stains on the basket. Apply the cleaner to the
sponge, not directly onto the basket surface,
before cleaning.
• Let all surfaces dry thoroughly before using.
CLEANING THE POWER BASE
• Wipe the power base with
a soft-damp sponge.
• Let all surfaces dry thoroughly prior to
inserting the power plug into the wall outlet.
STORAGE
• Ensure the Sage Smart Tea Infuser
™
is switched o, cleaned and dried before
storing.
• Ensure that the tea basket is correctly
assembled.
• Ensure that the jug lid is securely in place
on the glass jug.
• Wrap the power cord around the power cord
storage under the power base.
• Store the Sage Smart Tea Infuser
™
upright
on the power base. Do not store anything
on top.