User Manual

3
EN
• The oven is not suitable to
be used in a small appliance
enclosure. Ensure to leave
adequate space all around the
oven. Minimum space of 10cm
is recommended.
• The outer housing of the oven
may be hot during and after
cooking. Please do not touch
hot surfaces. Always keep the
power cord of this oven, and
those of other appliances near
the oven, clear from the oven
housing.
• Do not touch hot surfaces.
To avoid burns, use extreme
caution when removing pans,
dishes and accessories such
as the included grilling rack and
roasting pan, that contain hot oil
or other hot liquids.
• Do not lay cooking utensils,
roasting pans or dishes on the
glass door.
• Do not leave the door standing
open for extended periods
of time.
• Do not store any item on top
of the oven when in operation
except those described on
page 13 of this book.
• Do not place cardboard, plastic,
paper, or other ammable
materials in the oven.
• Do not cover crumb tray or any
part of the oven with metal foil.
This will cause overheating
of the oven.
• Caution should be exercised
when using pans and dishes
constructed of materials other
than metal. Ensure pans and
dishes are oven safe before
using in the oven.
• Caution should be exercised
when using lids in the oven, as
pressure build up in a covered
pan or dish may cause hot
ingredients to expel or the dish
to crack. Do not place sealed or
airtight containers in the oven.
• Oversized food and metal
utensils must not be inserted in
the oven as they may create re
or risk of electric shock.
• The use of accessories and
attachments not recommended
or supplied with this oven may
cause injuries.
• This appliance is for household
use only. Do not use in any type
of moving vehicles. Do not use
the appliance outdoors, or for
anything other than its intended
use. Misuse can cause injury.
• If the appliance is to be: left
unattended, cleaned, moved,
assembled or stored, always
switch the unit o and unplug
the cord from the power outlet
and allow to cool completely.
• Do not clean with metal
scouring pads. Pieces can
break o the pad and touch
electrical parts, creating a risk
of electric shock.