User Manual

REPLACING THE OVEN LIGHT

WARNING

Always unplug oven and let cool before replacing

bulb. Only use a 25-Watt, 220-240V, G9 type

oven bulb.

1. Remove the wire rack from the oven before

replacing the light.

2. The light is positioned on the lefthand side of

the oven cavity. Position your ngers on the

outside of the light housing and gently pull the

glass cover away from the oven wall to remove

it. If you are unable to pull the cover o, slide a

spoon into the left side of the light housing and

gently lever the glass cover o. Always hold the

glass cover with the other hand to prevent the

cover from falling and breaking.

3. Remove the used bulb by pulling it directly

out of its holder.

4. Use a soft cloth to insert the new bulb.

Do not directly touch the surface of the bulb

with your ngers as oil from your skin can

damage the bulb.

5. To reattach the glass cover, align the metal

hook with the left side of the light housing. Slide

the opposite end of the glass cover into the

metal bracket on the right side of the housing,

then push the metal hook into the left side of the

housing until it snaps securely into position.

NOTE

The top of the oven is very hot during and after

operation. As a result, storing items on top of the

oven is not recommended.

The only exception is the optional Sage Bamboo

Cutting Board and Serving Tray that fits in the

ribbed section on top of the oven. Visit