User Manual

Always unplug oven and let cool before replacing

bulb. Only use a 25-Watt, 220–240V, G9 type

oven bulb.

1. Remove the wire rack from the oven before

replacing the light.

2. The light is positioned on the left-hand side

of the oven cavity. Position your ngers on the

outside of the light housing and gently pull the

glass cover away from the oven wall to remove

it. If you are unable to pull the cover o, slide

a spoon into the left side of the light housing

and gently lever the glass cover o. Always

hold the glass cover with the other hand to

prevent the cover from falling and breaking.

3. Remove the used bulb by pulling it directly out

of its holder.

4. Use a soft cloth to insert the new bulb.

Do not directly touch the surface of the bulb

with your ngers as oil from your skin can

damage the bulb.

1. To reattach the glass cover, align the metal

hook with the left side of the light housing.

Slide the opposite end of the glass cover into

the metal bracket on the right side of the housing,

then push the metal hook into the left side of the

housing until it snaps securely into position.

REPLACING THE OVEN LIGHT

WARNING