Instruction Manual

2
Fill the water tank
with potable water.
9
EN
First Use
Read the important safeguards first to avoid risks of fatal electrical shock and fire.
3
Place the water tank, insert
the drip tray and the capsule
container in position. For your
safety, operate the machine
only with drip tray and
capsule container in position.
5
Turn the machine ON by pressing
the Lungo, Espresso, Ristretto, or
Steam button. The buttons will flash
while the machine heats up. Heating
up takes approximately 3 seconds.
The Lungo button will illuminate once
heated.
1
Rinse the water tank
before filling it with
potable water.
4
Plug the machine into
the power outlet.
6
Place empty jug under the coffee outlet.
Press Lungo button to begin cycle. Once
done, discard the liquid from the jug.
Rinse the jug.
First use is to rinse the machine &
prime the heating system.