Instruction Manual

5
• To protect against electric
shock, do not immerse the
kettle base, power base,
power cord or power plug
in water or allow moisture
to come in contact with
these parts.
• Do not remove the kettle
from the power base
during operation.
Ensure the kettle is
switched to ‘off’ position
after the water has boiled
before removing the kettle
from the power base.
• Do not move the kettle
while it is switched on.
• Do not open the lid
during operation.
• Do not overfill the kettle
past the maximum water
level mark. If the kettle is
overfilled, boiling water
may be ejected.
• Keep the kettle clean.
Follow the cleaning
instructions provided in
this book.
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Unwind the power cord
fully before use.
• Do not let the power cord
hang over the edge of
a bench or table, touch
hot surfaces or become
knotted.
• Connect only to a 230V
or 240V power outlet.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid.
• Always turn the appliance
to the OFF position,
switch off at the power
outlet, remove the plug
and allow all parts to
cool before attempting to
move the appliance, when
the appliance is not in use,
before cleaning and when
storing.