Instruction Manual

11
Care & Cleaning
Always switch ‘Off’ at the power outlet and
unplug the appliance from the power outlet
before cleaning.
REMOVABLE FILTER
The kettle features a removable mesh filter to
remove scale deposits for cleaner water.
To remove the scale deposits from the filter,
open the lid and slide the filter up and out
of the kettle.
The filter can be cleaned by running under
hot water and rubbing with a cleaning cloth or
brush. To replace filter, simply slide the filter
down into the slot behind the spout of the
kettle and push back into position.
NOTE
The filter could become damaged with time.
Please check regularly and replace if found
damaged.
NOTE
The concealed element in the base of the kettle
is made from high quality stainless steel.
Any brown stains appearing are the result of
mineral deposits and are not rust.
DESCALING
It is essential that regular descaling takes
place. Frequency will depend on the usage
of the kettle and the hardness of the water in
your area. A build-up of scale may cause the
inside of the kettle to discolour and ultimately
may damage the element. This will affect the
efficiency of the appliance and may invalidate
the warranty agreement. We recommend the
use of Sage "the Descaler" as it's specially
formulated for descaling kettles. To order visit
www.sageappliances.co.uk
1. Empty one sachet (25g) into 1 litre of
warm water, stir to dissolve.
2. Pour into the kettle.
3. Leave stand for 5 minutes.
4. After 5 minutes, discard the solution.
5. Rinse the kettle twice with fresh clean water.
NOTE
Do not use chemicals, alkaline cleaning agents,
steel wool or abrasive cleaners to clean the
inside or outside of the kettle. Use a mild
cleaning agent with a soft damp cloth.
STORAGE
Ensure the kettle is switched off, clean and
dry before storing. Ensure the lid is closed and
locked securely into place. Wrap the power
cord around the cord storage under the power
base. Stand the kettle upright on the power
base. Do not store anything on top.