User Manual

6
BEFORE FIRST USE
Before using your juicer for the rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched o at the power
outlet and the power cord is unplugged.
Wash the lter bowl surround, lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a at, dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the
control panel, then switch the appliance
o at the power outlet and unplug the
power cord.
2. Place lter bowl surround on top of the
motor base.
3. Align the arrows at the base of the
stainless steel lter basket with the
arrows on the motor drive coupling
and push down until it clicks into place.
Ensure the stainless steel lter basket
is tted securely inside the lter bowl
surround and onto the motor base.
4. Place the juicer cover over the lter bowl
surround, positioning the feed chute over
the stainless steel lter basket and lower
into position.
5. Raise the safety locking arm up and
locate into the two grooves on either side
of the juice cover.
ASSEMBLY