User Manual

TROUBLESHOOTING

POSSIBLE PROBLEM EASY SOLUTION

Pulp too wet and

reduced extracted juice

• Try a slower juicing action. Remove the stainless steel lter basket

and thoroughly clean mesh walls with a cleaning brush. Rinse the

lter basket under hot water. If the ne mesh holes are blocked,

soak the basket in a solution of hot water with 10% lemon juice to

unlock the holes or wash in the dishwasher. This will remove excess

bre build up (from fruit and vegetables) which could be inhibiting

the ow.

Juice leaks between the

rim of the Juicer and the

juicer cover

• Try a slower juicing speed and push the food pusher down the feed

chute more slowly.

• Ensure all parts are securely pieced together, with the interlocking

arm in place.

Juice sprays out

from spout

• The juice is being extracted too fast: try a slower juicing speed and

push the food pusher down the feed chute more slowly.

Overheating with

excessive loads.

• The juicer is tted with a safety device which safeguards against

overheating with excessive loads. If overheating occurs, the juicer

will automatically activate the overload protection device and the

unit will switch itself o. When the overload protection is activated,

unplug the Juicer from the power outlet for at least 15 minutes to

allow the unit to cool. Then plug the juicer into the power outlet and

use as normal.

• It is important to ensure the juicer is turned on and the motor is

running prior to loading the chute. Do not put excessive loads in the

feed chute and ensure the lter basket is totally clear of any food

build up, on the blades and mesh, as this can result in unnecessary

resistance against the motor resulting in overheating.