Tus neeg siv phau ntawv

7
EN
BEFORE FIRST USE
Before using your juicer for the rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched o at the power
outlet and the power cord is unplugged.
Wash the lter bowl surround, lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a at, dry surface such
as a bench top. Ensure that the motor base
is switched OFF at the control panel, then
switch the appliance o at the power outlet
and unplug the power cord.
2. Place lter bowl surround on top of the motor
base.
3. Align the arrows at the base of the stainless
steel lter basket with the arrows on the motor
drive coupling and push down until it clicks
into place. Ensure the stainless steel lter
basket is tted securely inside the lter bowl
surround and onto the motor base.
4. Place the juicer cover over the lter bowl
surround, positioning the feed chute over the
stainless steel lter basket and lower into
position.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juice cover.
ASSEMBLY