User Manual

9
EN
INSTALLING THE WATER FILTER
• Soak the lter in cold water for 5 minutes.
• Wash the lter holder with cold water.
• Set the reminder for next month of
replacement. We recommend to replace
the lter after 3 months.
• Insert the lter into the two parts of the
lter holder.
• To install the assembled filter holder into
the water tank, align the base of the lter
holder with the adapter inside the water tank.
Push down to lock into place.
• Fill the water tank with cold water, slide and lock
back into position.
FIRST USE
1. Press POWER button to turn the machine on.
2. Follow the instructions on screen to guide
you through rst use setup.
3. After completing setup, the machine will
tell that it is ready to use.
Select the guide to find out more about your Oracle Touch
or to exit and proceed to your drink selection
Guide
Your Oracle is now ready to use
The machine is now in STANDBY mode.
NOTE
If your water hardness is either 4 or 5 when
tested, we strongly recommend you change
to an alternate water source.
GRINDING OPERATION
Insert bean hopper into position on-top of
the machine. Turn dial to lock into place.
Fill hopper with fresh beans.
Functions