User Manual

15
EN
AUTO OFF MODE
The machine automatically switches
to AUTO OFF mode after 30 minutes.
TAMP SET
Adjusting tamp parameters allows for ne tuning
of coee tamping force and polishing duration.
While 'TAMP SET' is displayed on the LCD, press
the SELECT dial. The tamp force setting will ash.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
PRE-INFUSION
Low pressure pre-infusion allows you to control
the pressure and duration of the pre-infusion
phase of the espresso extraction. While 'PRE
INFUSE' is displayed on the LCD, press the
SELECT dial. The pump power setting will ash.
Turn SELECT dial to increase or decrease the
pre-infusion pressure. Press SELECT dial to set
and pre-infusion duration will ash. Turn SELECT
dial to adjust seconds.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
LONG BLACK ADJUST -
PROGRAMMING CUSTOM SETTINGS
There are 6 custom Long Black settings for you
to program to suit your cup size and strength
preferences. To program your custom setting:
1. Fill the portalter using the auto grind, dose
& tamp function.
2. Insert the portalter into the group head.
3. Position your cup so the portalter spouts and
hot water outlet are directed inside the cup.
4. Press the MENU button. Rotate the SELECT
dial to ‘LONG BLACK ADJUST’ then press
the SELECT dial.