User Manual
9
EN
GENERAL OPERATION
Setting the Grind Size
We recommend you start at setting 8 and adjust
as required.
Setting the Grind Amount
Set the GRIND AMOUNT dial to the 3 o’clock
position as a starting point. Adjust towards LESS
or MORE as required to adjust the dose amount.
Selecting the Filter Size
Automatic Dosing
•
the grinding activation switch.
• Grinding will automatically stop, however
if you wish to stop grinding before the cycle
Manual Dosing
•
grinding activation switch. Continue holding
has been dosed.
•
•
• As a guide to dose, the top edge of the metal cap
on the tamper should be level with the top of the
Trimming the Dose
The Razor
™
precision dose trimming tool allows
you to trim the puck to the right level for
a consistent extraction.