User Manual

15
EN

4.
Press the 1 CUP button to start the


takes approximately 25 seconds. The 1 CUP

constant once the descaling process has

25 seconds, press the 1 CUP button again.
Descale the steam and hot water
components
Descaling steam and hot water takes
approximately 13 seconds and 8 seconds
respectively. Descaling can be terminated
prematurely by turning the steam dial to STANDBY.
5. Descale Steam component by turning
the steam dial LEFT towards the STEAM icon.
6. Descale Hot water component by turning the
steam dial to the RIGHT towards the HOT
WATER icon.
Repeat processes to complete descaling
After the above processes about half
(0.5 litre) of the descale solution should
be left in the water tank.
7. Repeat steps 4-6 above to complete the
descaling process to empty the solution
in the tank.
Descaling Solution Rinse
8. After descaling, remove the water tank and

to the maximum capacity (2 litres) and repeat
steps 4-6 to further cleanse the machine of any
residue of the cleaning solution thoroughly.
9. Press ‘POWER’ to quit the descaling process.
This will be indicated by the LED lights

NOTE

is no action for 5 minutes in descaling mode.
To resume descaling, please start from step 3.