User Manual

14
CARE & CLEANING
REPLACING THE WATER FILTER
5m
I
N
O
U
T
The provided water lter helps prevent scale build-up in and on many of the inner functioning
components. Replacing the water lter after 3 months or 40L will reduce the need to descale
the machine.
CLEANING CYCLE
The machine will detect when 200 extractions
have been carried out since the last cleaning
cycle; this will be shown by the 1 CUP and 2
CUP buttons alternately ashing.
5s
+
2L
68oz
To bypass the cleaning cycle; press the STEAM
button. The machine will go back to ready mode,
but will display cleaning alert again the next time
that the machine is turned on.
1. Insert the provided cleaning disc into
the lter basket in the portalter.
2. Place a cleaning tablet on top of the
cleaning disc.
3. Lock the portalter into the group head.
4. Empty the drip tray and replace onto the
machine. Place a 2L / 68 .oz container
under the portalter and steam wand
sitting on the drip tray.
5s
+
2L
68oz
5. Fill the water tank to the MAX line then
reattached to the machine, ensuring it is
correctly attached.
6. Press and hold the 1 CUP and 2 CUP
buttons for 5 seconds to enter the
cleaning cycle mode.
5s
+
2L
68oz
7. The 1 CUP and 2 CUP buttons will
remain illuminated. Press either 1 CUP
or 2 CUP to begin the cleaning cycle.
When the cycle is in progress, the lights
will alternatively ash.
8. Once the cycle is complete the machine
will ready to ready mode.
9. Remove and rinse the portalter,
cleaning disc, drip tray and container.
DESCALING
After regular use, hard water can cause mineral
build up in and on many of the inner functioning
components, reducing the brewing ow, brewing
temperature, power of the machine, and the
taste of the espresso.
The machine will indicate that it requires
descaling when the 1 CUP and STEAM
button and the 2 CUP button ash alternately
for 15 seconds. Pressing any of these buttons
will cancel the alert and return the machine
to ready mode.