User Manual

15
EN
REPLACING THE WATER FILTER
5m
I
N
O
U
T
It is recommended to descale your unit every 90 days when water hardness is at level 4; and when
water hardness is at level 6, descale your unit every 60 days.
CLEANING CYCLE
The machine will detect when 200 extractions
have been carried out since the last cleaning
cycle; this will be shown by the 1 CUP and 2
CUP buttons alternately ashing.
5s
+
2L
68oz
1. Insert the provided cleaning disc into
the lter basket in the portalter.
2. Place a cleaning tablet on top of the
cleaning disc.
3. Lock the portalter into the group head.
4. Empty the drip tray and replace onto the
machine. Place a 2L / 68 .oz container
under the portalter and steam wand
sitting on the drip tray.
5s
+
2L
68oz
5. Fill the water tank to the MAX line then
reattached to the machine, ensuring it is
correctly attached.
6. Press and hold the 1 CUP and 2 CUP
buttons for 5 seconds to enter the
cleaning cycle mode.
5s
+
2L
68oz
7. The 1 CUP and 2 CUP buttons will remain
illuminated. Press either 1 CUP or 2
CUP to begin the cleaning cycle. When
the cycle is in progress, the lights will
alternatively ash.
8. Once the cycle is complete the machine
will go back to ready mode.
9. Remove and rinse the portalter, cleaning
disc, drip tray and container.
NOTE
The user can also manually enter the cleaning
cycle mode before the cleaning cycle alert is
triggered. Press and hold 2 CUP and STEAM
buttons simultaneously for ve seconds when
the unit is at o mode (all lights are o)
DESCALING
After regular use, hard water can cause mineral
build up in and on many of the inner functioning
components, reducing the brewing ow, brewing
temperature, power of the machine, and the taste
of the espresso.
Care & Cleaning