User Manual

13
EN
STEAM WAND PURGING
After texturing milk, the steam wand must be
returned to the lowered position and allowed to
automatically purge. Not doing so, could result
in the steam wand blocking.
If the steam wand remains in the raised position,
the machine will display a lower steam wand
alert; illuminating the MILK TEMP and MILK
FOAM lights in a downwards pattern, identifying
that the steam wand needs to be lowered.
To manually commence the steam wand purge,
with the steam wand lowered, press and hold
the STEAM button for 5 seconds.
HOT WATER OPERATON
Hot water through the steam wand:
When machine is on ‘ready mode’, press 1 CUP
and MILK FOAM buttons, and hot water ow will
start through the steam wand. Press any button
to stop hot water ow.
2s
+
+
+
OFF
WARNING
Cup temperature is at 90°C (194°F). Be careful
in handling hot beverages.