the Smart Grinder™ Pro SCG820
OPERATING YOUR NEW APPLIANCE CONTENTS 2 We recommend safety first 5 Know your new appliance 6 Operating your new appliance 11 Care & cleaning 12 Troubleshooting SAGE® RECOMMENDS SAFETY FIRST At Sage® we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
OPERATING WE RECOMMEND YOURSAFETY NEW APPLIANCE FIRST • Do not leave the appliance unattended when in use. • Always ensure the appliance is turned OFF, unplugged at the power outlet and has been allowed to cool before cleaning, attempting to move or storing. • Always turn the appliance to the off position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. • Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way.
OPERATING WE RECOMMEND YOURSAFETY NEW APPLIANCE FIRST • This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing and utensils away from the hopper during operation.
OPERATING KNOW YOURYOUR NEW APPLIANCE NEW APPLIANCE A. Bean Hopper Lid B. Bean Hopper C. Hardened Stainless Steel Conical Burrs D. Backlit LCD Screen E. GRIND AMOUNT/PROGRAM Dial F. SHOTS/CUPS Button A G. Grind Outlet H. Grind Tray I. J. Grind Size Dial B START/PAUSE/CANCEL Button K. Portafilter Activation Switch ACCESSORIES L. Portafilter Cradle 50–54mm M. Portafilter Cradle 58mm N. Conical Burr Cleaning Brush O. Grinds Container.
OPERATING YOUR NEW APPLIANCE GRINDING FOR ESPRESSO COFFEE BEFORE FIRST USE Remove and safely discard all promotional labels and packing materials attached to your Sage® product. Wash hopper, cradles, grind container, container lid and cleaning brush in warm soapy water and dry thoroughly. Wipe exterior of grinder with a soft damp cloth and dry thoroughly. Place grinder on flat level surface and plug power cord into 220–240V outlet and switch Power ‘ON’.
OPERATING YOUR NEW APPLIANCE STEP 2: Selecting your SHOTS/CUPS Select the desired amount of ground coffee required by pressing the SHOTS/CUPS button. GRIND AMOUNT SHOTS CUPS PROGRAM START PAUSE CANCEL NOTE If the Grind Size Dial is tight, run the grinder by pressing the START/PAUSE/CANCEL button while turning the Grind Size Dial. This will release coffee grounds caught between the burrs.
OPERATING YOUR NEW APPLIANCE • Select the required amount of ground coffee by pressing the SHOTS/CUPS button. • Press the START/PAUSE/CANCEL button to start grinding operation. NOTE Programming a custom grind amount/time only sets it for that particular brew method. This will not change the other Shots or Cups settings. Pause Function SHOTS CUPS You can pause the grinder during operation allowing you to collapse or settle the coffee in the portafilter.
OPERATING YOUR NEW APPLIANCE Program Function Once you have set your required dose, you can program this time into the number of shot(s) currently displayed on the LCD. Press and hold the PROGRAM button, grinder will beep twice to confirm. Only the shot displayed will be programmed, all other shots will remain unchanged. ADJUSTING YOUR GRIND AMOUNT Increasing the Grind Amount To increase the grind amount selected, turn the GRIND AMOUNT dial to the right.
OPERATING YOUR NEW APPLIANCE ADJUSTING CONICAL BURRS Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A feature of your Smart Grinder™ Pro is the ability to extend this range with an adjustable upper burr. We recommend making only one adjustment at a time.
CARE, CLEANING & STORAGE CARE, CLEANING & STORAGE NOTE 1. Empty beans from the hopper Do not use alkaline or abrasive cleaning agents, steel wool or scouring pads, as these can damage the surface. and grind out any excess beans (see below). 2. Unplug power cord from power outlet before cleaning. NOTE 3. Wash the grind container and lid, Please do not clean any grinder parts or accessories in the dishwasher. bean hopper and lid in warm soapy water, rinse and dry thoroughly. 4.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO Grinder does not start after pressing START/ PAUSE/CANCEL button • Grinder not plugged in. • Plug power cord into power outlet. • Bean hopper not attached correctly. ‘PLEASE LOCK HOPPER’ will be displayed on LCD screen. • Lock bean hopper into position. Motor starts but no ground coffee coming from grind outlet • Incorrect button pressed. Motor starts but operates with a loud ‘racket’ noise • Grinder has overheated.
Sage ® Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970 www.sageappliances.co.uk customerservice@sageappliances.co.uk What’s on your mind? Register your product and get more from your purchase Product registration takes only a few minutes and ensures a record of your purchase. Registration also makes it easier to get support and advice on any questions or issues that you might have in the future.
