the Fresh & Furious™ SBL620
Contents 2 Sage® recommends safety first 5 Components 8 Troubleshooting 6 8 Functions Care & Cleaning SAGE® RECOMMENDS SAFETY FIRST At Sage® we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
EN • • • • • • • at the power outlet when the appliance is not in use. Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged and maintenance other than cleaning is required please contact Sage Customer Service or visit sageappliances.com Any maintenance other than cleaning should be performed by an authorised Sage® service centre. Children should not play with the appliance.
• Be careful when handling and cleaning blades, as they are very sharp. Mishandling of the blades may cause injury. • Avoid putting the cup or jug on the motor base while the motor is still spinning. • Do not operate without any ingredients in the cup or jug. • Never attempt to operate with damaged blades, or with utensils, or any foreign objects inside the cup or jug. • Do not put the cup or jug in extremes of heat or cold, for example placing a cold jug into hot water, or vice versa.
EN Components A B C D A. Inner measuring cup B. Sage® Assist™ lid C. 1.5 litre BPA-free Eastman Tritan™ jug Impact resistant, shatter proof, and dishwasher safe. D. Kinetix® blade and bowl system E. Blender Base F. SMOOTHIES and AUTO PULSE/ICE CRUSH programs G. 5 electronic speeds H.
Functions BEFORE FIRST USE Before using your Sage® Blender for the first time, remove any packaging material and promotional labels. Wash the lid, inner lid, blender jug (refer to “Care & Cleaning”) in warm, soapy water with a soft cloth. Rinse and dry thoroughly. Do not place parts in the dishwasher (with the exception of the blender jug). Please refer to the “Care & Cleaning” Section for further details. The motor base can be wiped with a damp cloth. Dry thoroughly.
EN MANUAL SPEED SELECTION ON / OFF The ON / OFF button powers the unit into READY mode. ELECTRONIC SPEED CONTROL There are 5 electronic speed buttons from MIX through to LIQUIFY. MIX combines more delicate foods with a folding motion, and is good for combining wet and dry ingredients. LIQUIFY is the fastest setting, and is ideal for breaking down ingredients to make cocktails and other finely blended mixtures. Select the required speed (1 to 5) by pressing the corresponding speed button.
Troubleshooting PROBLEM Motor doesn’t start or blade doesn’t rotate Food is unevenly chopped Food is chopped too fine or is watery Food sticks to blade and jug Blender overloaded (all lights flashing) EASY SOLUTION • • • • Check the blender jug and lid are securely in place. Check the ON / OFF button and selected function button is illuminated. Check that the power plug is properly inserted into the power outlet. This can happen when too much food is being blended at one time.
EN Notes 9
