User Manual

● Apply to single color LED RF controller or RF dimming driver.●
● Adopt 2.4GHz wireless technology, remote distance up to 30m.
● Each remote can match one or more receiver.
● CR2032 button battery powered.
Dimension
Wiring diagram
Push Switch
1. Short press: Turn on/off light.
2. Long press(1-6s): When light is on, increase or decrease brightness continuously.
Push switch function:
43.00 m m
17.00 m m
26.50 mm
Model No.: R1-1(L)
Features
RF dimming/Push dim/Wall junction box mounting
Push Switch RF Remote Controller
LVD RED
R1-1(L) Push Switch RF Remote Controller
User Manual Ver 1.0.3
Page 1
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Operation temperature
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Output signal RF 2.4GHz( )
Working voltage 3VDC CR2032( )
Working current ＜5mA
Standby current ＜2μA
Standby time 2 years
Remote distance 30m(Barrier-free space)
Base
Battery Installation
Back holder
C 2032 BatteryR
Note: Before the first use,
please remove the protective film on the battery.
● Connect with push switch to achieve on/off and 0-100% dimming function.
Safety and EMC
EMC standard (EMC)
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED)
ETSI EN 300 328 V2.2.2
Certification
CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)