Operation Manual

10 11
PAge heAder..... PAge heAder.....
Before first use
Before using your bench mixer for the first
time, remove any packaging material and
promotional labels. Ensure the speed control
dial is in the OFF position, the mixer is
switched off at the power outlet and the
power cord is unplugged.
Remove the mixing bowl, beater, whisk and
dough hook and wash in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
The bowl and the attachments may be
washed in the dishwasher.
When first using your bench mixer, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
Attaching the bowl
1. To remove or insert the mixing bowl,
the mixer motor head must be raised
and locked into the open position.
2. Place the mixer on a level, dry bench
top. The mixer motor head should be
in the horizontal (closed) position
when moving. Raise the mixer motor
head by pressing the RELEASE
button.
ASSEMBLY & OPERATION
3. Lift the mixer motor head up until it
tilts back and locks into the
open position.
4. Insert the mixing bowl into the bowl
locking recess of the mixer stand
and turn clockwise until the bowl
locks securely into place.
ASSEMBLY & OPERATION
Attaching mixing and whisking tools
1. Raise the motor head by pressing the
RELEASE button.
2. Align the groove in the top of the
mixing attachment with the locking
pin on the spindle extending down
from the mixer motor head.
3. Push the attachment upwards and
turn clockwise until it locks securely
onto the locking pin on the spindle
(see Fig. 1).
Fig. 1
4. Lower the mixer motor head by
pressing the RELEASE button and
gently lowering the mixer motor
head until it locks into the closed
position.
5. The splash guard can now be
assembled if required. Slide the main
ring into position on top of bowl,
then assemble the pour spout.
Operating the mixer
Planetary mixing action
By replicating a similar mixing action used
by commercial mixers in bakeries and
patisseries, the Scraper Mixer Pro head
rotates around the bowl while rotating
the beater in the opposite direction. This
ensures a superior and thorough mixing
result without the need for a rotating bowl.
1. Ensure the speed control dial is set
to the OFF position, plug the cord
into a 220–240V power outlet and
switch the power ON at the power
outlet. The illuminated LED speed
indicator band will flash and the
count up/down timer will display
0:00. The mixer is now ready.
2. Add ingredients to the mixing bowl
as indicated in the recipe.
3. Always begin mixing by selecting
a low speed setting on the speed
control dial. Starting on a low speed
will prevent ingredients splattering.
Increase the speed as suited to the
mixing task. The speed setting can
be adjusted during operation. If
necessary, stop the mixer during
operation and scrape any food
mixture down the sides of the
mixing bowl with a spatula.