the Smart Scoop™ BCI600/SCI600 EN QUICK GUIDE
Contents 2 Sage® recommends safety first 7 Components 6 9 11 12 14 Features Functions Care & Cleaning Troubleshooting Guarantee SAGE® RECOMMENDS SAFETY FIRST At Sage® we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
EN • • • • • • • • use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury. Fully unwind the power cord before operating. Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob. Vibration during operation may cause the appliance to move. Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
• • • • • 4 resetting of the overload protection, do not attach an external switching device (such as a timer) or connect the appliance to a circuit that can regularly switch the appliance on and off. Carefully read all instructions before operation and save for future reference.
EN WARNING Do not use electrical appliances inside the ice cream bowl. WARNING When disposing of the appliance, do so only at an authorised waste disposal centre. The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.
Features AUTOMATIC MODE Automatic mode churns and freezes the ingredients to the selected/desired consistency. Select one of the four pre-set functions: Sorbet, frozen yogurt, gelato or ice cream. Smart Scoop will beep when ready. MANUAL MODE The time to make ice cream can be manually set for pre-timed recipes. PRESET FUNCTIONS The Sage® Smart Scoop™ has four pre-set functions to pick from. Select one of the following settings; sorbet, frozen yogurt, gelato, or ice cream.
EN Components A B C N G H I D K L C M F E A. Anodised ice cream bowl Not dishwasher safe and should not be stored in the freezer. B. Paddle C. Lid D. Stainless steel housing E. POWER F. START / PAUSE G. Manual timer H. PRE-COOL function I. Keep cool J J. Auto timer/Hardness selection dial Will scroll between the following settings: sorbet, frozen yogurt, gelato, or ice cream. Rotate the dial left for softer textured desserts or right for harder textured desserts. K.
R U V T Q S P O SMART SCOOP DISPLAY ACCESSORIES P. Hardness selection bar X. Spatula use to scrape the bowl O. LCD Control Display Q. Progress indicator bar R. Keep Cool will keep the frozen dessert chilled and churned for up to 3 hours. S. Add mix-ins will flash to let you know when it is time to add your favourite mix-ins. W. Anodised ice cream bowl Y. Paddle Z. Bottle brush for easy cleaning of the paddle and bowl T.
EN Functions BEFORE FIRST USE Machine preparation Remove and discard all labelling and packaging materials attached to your ice cream machine. Ensure you have removed all parts and accessories before discarding the packaging. Remove the lid, ice cream bowl and paddle from the machine. Clean these parts and accessories using warm soapy water and rinse thoroughly. Ensure all parts are completely dry. FIRST USE Initial start up • Place paddle inside the bowl.
PRE-COOL NOTE PRE-COOL can only be operated in the stand by mode, before pressing START / PAUSE button. a) PRE-COOL lowers the temperature of the ice cream machine to reduce the time it takes to prepare your dessert. It is optional and is ideal to use while you are preparing your ice cream base before churning. b) To select PRE-COOL function, press the PRE-COOL button. The light surrounding the button will turn from white to red to indicate that the machine is in PRE-COOL mode.
EN Care & Cleaning Ensure that the ice cream machine is turned off by pressing the POWER button. The ice cream machine is off when the START / PAUSE button’s LED light is no longer illuminating red. Remove the power plug from the power outlet. Allow the ice cream machine compressor to cool completely before disassembling and cleaning. CLEANING THE STAINLESS STEEL HOUSING 1. Wipe the exterior of the stainless steel housing and the LCD screen with a soft damp cloth.
Troubleshooting PROBLEM EASY SOLUTION Ice cream won’t freeze • START / PAUSE button needs to be pressed. • Alcohol in ice cream? Added too much or too soon. • Ensure that there is adequate ventilation around the ice cream maker. We recommend leaving at least 15cm between the ice cream machine and adjacent hard surfaces. Paddle won’t move • Paddle won’t move if the pre-cool function is selected for the first 5 minutes.
EN PROBLEM EASY SOLUTION My ice cream maker seems to be vibrating briefly? • The internal compressor is mounted on special rubber mounts to reduce the noise and vibration during operation. When cooling is not required the compressor will automatically turn off and a small amount of vibration for 1–2 seconds is normal. The controls don’t work? • The child lock may be on. Press and hold the HOLD button for 2 seconds to disengage the locking.
Guarantee 2 YEAR LIMITED GUARANTEE AND 5 YEAR LIMITED MOTOR GUARANTEE Sage Appliances guarantees this product for domestic use in specified territories for 2 years for all parts of the product and 5 years for the product’s motor from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances).
EN Notes 15
GBR BRG Appliances Limited Unit 3.
