Operation Manual

5
WE RECOMMEND SAFETY FIRST
• If food becomes lodged
around the blending blade,
turn the blender off by
pressing the power
button
on the control panel. Then
switch the appliance off at the
power outlet and unplug the
cord. Make sure the motor
and blades have completely
stopped before removing the
jug from the motor base. Use
a spatula to dislodge or stir
the food before continuing.
Do not use fingers as the
blades are sharp.
• Keep hands, fingers, hair,
clothing as well as spatulas
and other utensils away
from the blender jug during
operation. Never place your
fingers, hands or utensils
inside the blender jug without
unplugging the appliance
from the power outlet.
• Be careful when handling
the jug as the blades are
very sharp. Be careful when
emptying the blender jug and
during cleaning. Mishandling
of the blades may cause
injury.
• Do not remove the blender
jug from the motor base while
in operation.
• Do not use the blender for
anything other than food
and/or beverage preparation.
• Do not operate the blender
without food or liquid in the
blender jug.
• Do not process hot or boiling
liquids. Allow to cool before
placing into the blender jug.
• Do not subject the blender
jug to extremes of hot or cold,
for example, placing a cold
jug in hot water or vice versa.
• Keep the appliance clean.
Refer to care and cleaning
instructions in this manual.
WARNING
Please do not attempt to
use the blender while the
“OVERLOAD PROTECTION”
is flashing.