User Manual

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
User Manual Ver 1.0.9
Page 2
Color temperature+ -:/
Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Brightness+/-:
Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Scene 1/2 :
, .Short press recall the scene long press 2s save the current color into the scene
the LED indicator will light up longer when save OK.
ON
OFF
ON
OFF
ON
OFF
OF F
ON OFF
All
ON
All
All on
All off
Zone1 on
Zone1 off
Zone2 on
Zone2 off
Zone3 on
Zone3 off
Zone4 on
Zone4 off
1
2
3
4
All on: Turn on all 4 zone light .
All off: Turn off all 4 zone light .
Zone 1 4 on - :
Short press turn on zone light,
long press 1-6s increase brightness continuously.
Zone 1 4 off - :
Short press turn off zone light,
long press 1-6s decrease brightness continuously.
S1
S2
CT
-
CT
+
-
+
N W
W W C W
On/Off
Natural white
Warm white
Cool white
Brightness-
Brightness+
Scene1
Scene2
Color
temperature-
Color
temperature+
+
.All on: Turn on all 8 zone light
All off: Turn off all 8 zone light .
Zone 1-8 on/off:
Short press turn on/off zone light,
long press 1-6s increase or decrease
brightness continuously.
Zone1 on/off
All on
All off
Zone3 on/off
Zone5 on/off
Zone7 on/off
Zone2 on/off
Zone4 on/off
Zone6 on/off
Zone8 on/off
OFF
All
ON
All
1 2
3
4
5
6
7 8
R2 1 zone CCT remote●
RU4 4 zone dimming remote●
RU8 8 zone dimming remote●
R1,R2,RU4,RU8 10-Key RF Remote Controller
LED indicator
LED indicator
LED indicator
Brightness+/-:
Short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
Scene 1/2:
Brightness memory.
,Short press recall the scene
long press 2s save the current brightness into the scene.
the LED indicator will light up longer when save OK.
S1 S2
Small Night light
Brightness+
Scene2
Brightness 50％
Brightness 100％
On/Off
Brightness 25％
Brightness-
Scene1
Brightness 75％
LED indicator
R1 1 zone dimming remote●
Key function