Operation Manual

Sagab by Elma
945
24
Measuring limits
x DC A 0,01A to 1000A
x AC A 0,01A to 1000A
x DC V 0,1mV to 600V
x AC V 0,1mV to 600V
x Resistance 0,1Ωto 40MΩ
x Capacitance 0,001nF to 40mF
x Frequency 1Hz to 4kHz
x Temperature -40°C to 1000°C
Safety information
This manual contains information that must be followed for operating the meter safely and
maintaining the meter in a safe operation condition. If the meter is not used in a manner
specified in this manual, the protection provided by the meter may be impaired.
The meter has been designed and complies with IEC 61010-1 and EN61010-1 Safety
requirements for electronic measuring apparatus.
Warning
Read through the operating instructions and understand the instructions before operating
the meter.
Keep the manual at hand so as to enable quick reference when necessary.
Ensure that the use of the meter is in its intended applications and follow measurement
procedures described in this manual.
Follow all safety and operating instructions to ensure maximum personal safety during the
use and operation of the meter.
Failure to follow the above instructions may cause injury, instrument damage and damage
to equipment under test.
The symbol indicated on the meter means that the user must refer to related parts in the
manual for safe operation of the meter. Be sure to carefully read the instructions following
each symbol in this manual.
DANGER is reserved for conditions and actions that are likely to cause serious or fatal
injury.
WARNING is reserved for conditions and actions that are likely to cause serious or fatal
injury.
CAUTION is reserved for condition and actions that are likely to cause minor injury or
damage.