Operation Manual

Sagab by Elma
945
32
Peak hold
This function is used to freeze the max and min reading for voltage and current.
1. Press the PEAK button once. Pmax is displayed and max value will freeze on the
display
2. Press PEAK once again. Pmin is displayed and min value will freeze on the display.
3. Press and hold the PEAK button to turn peak function off.
LCD backlight
1. Press the button for 3 seconds and the light will come on.
2. Press the button for 3 seconds and the light will come off.
Auto power off
This feature automatically turns off the meter after 20 minutes of no activity.
Battery replacement
When the sign shows in the display, the battery should be replaced.
1. Disconnect testleads from instrument.
2. Set the function switch to OFF
3. Remove the battery cover in the bottom by removing the screws.
4. Replace the battey with a 9V battery.
5. Replace the battery cover.
www.elma-instruments.com
MD 20140814 V1.2