User Manual

9390 Veterans Memorial Pkwy O’Fallon, MO 63366
www.sagasoundseries.com
[e-mail]
Source 1 or 2 Speaker Selector Switch
SAG1100HE
INSTRUCTIONS
1. The terminal block accepts 16 to 22 gauge wire.
2. Remove about 1/4 inch of insulation from the ends of all wires to
be connected to the speaker switch and twist the exposed strands.
Use the block-wiring diagram as you connect amplifiers and
speakers.
3. When using two stereo amplifier sources, attach the wire to inputs
"1" and "2". Attach the speaker wire to the stereo speakers to the
"output" located on the rear of the switch panel.
Saga Warranty Information
This Saga product carries a ONE YEAR WARRANTY on both parts
and labor. Should your Saga component fail to operate properly at
any time during the warranty period, Saga will repair or replace (at
our option) the item barring any indication of misuse or abuse.
Freight to a Saga authorized facility is paid by the customer. Return
freight is paid by Saga.
Warranty registration occured automatically at the time your order
was placed. There is no need to complete or mail in additional
paperwork.
If you have any questions about the operation or installation of this
product, please call our distributor, Skywalker Communications at
[phone] or [phone]. Skywalker Communications
hours of operation are from 8am to 5pm, Central Standard Time.
INSTRUCTION MANUAL
SAGA SOUND SERIES
SAG1100HE
DUAL SOURCE/SPEAKER SELECTOR SWITCH
Saga Sound Series Home Edition
SAG1100HE
SAG1100HE