User Manual

Playback Video
6
08
Right click on the home screen of your monitor and navigate to System setup >
Record Setup again, click Copy to, check All, Click Ok. Copy the same setting of
Channel 1 for the remaining channels.
To use the playback feature, you must first set up the recording function as
described in the section above. To playback, from the home screen of your
monitor, right click and navigate to Video playback. From the right manual bar,
choose date, channel, and select time, click Search and click playback. Please
note that when the hard drive is full, the new recording will automatically overwrite
the prior recording.
For motion records only, just tick the green Motion only from the manual bar,