User Manual

13
From the home screen of your monitor, right click your mouse and navigate to
System Setup, select Network setup, select Email from the left menu bar. From
there, click Enable, enter the information in the fields as shown in the figure below.
For the dot, please be sure to use the correct key on the keyboard next to the
forward slash as shown in this figure:
Complete the fields on the screen as follows(take hotmail account as an example):
SMTP Server: smtp-mail.outlook.com
Port: 587
Username: Sender e-mail address (click shift on the virtual keyboard for “@”
symbol Hotmail e-mail address) to send alarm
Password: Sender E-mail login password
Encryption Type: SSL
Sender: Sender e-mail address to send alarm
Sendee: Receiver e-mail address to receive alarm (it must be different with
sender, you can use another Hotmail/Gmail/Yahoo Email address)
If you use other email account as sender,such as gmail,yahoo,etc,you need find
out their own SMTP server and port,or you can contact our service person.
smtp-mail.outlook.com
[e-mail]
587