User Guide

06
Click network icon at the bottom right side of main screen > you should see page
of Fast network.
Once Cloud(P2P) is “Online”, you will be able to access videos from the cameras
remotely by PC or Smart Phone (More on this in the next Section of this manual).
If the system does not come “Online” please do the following:
1.Make sure the light at the network port of the NVR is flashing which indicates
active communication with the router. Re-seat or replace the cable if necessary.
2. In System Setup>Network Setup page, please tick off DHCP, click Apply.
Then, please select DHCP again, click OK.
3.Power off the NVR by removing the power cable. Then, plug it in again to
re-power the unit. NVR will re-boot.
4.Wait 2-3 minutes then repeat steps 1-2. If the problem remains please contact
the SAFEVANT Customer Service Team.
How to contact us?
Please see Page #1 in the booklet
(Contact us at [e-mail])