User Guide

Connect the NVR and cameras with power adapters provided.

Connect the mouse to the NVR. (Please note, power supply for NVR

box is 12V-2000mA)

Connect the PC or TV monitor to the NVR with a VGA or HDMI cable.

Laptop or All-in-one computer NOT supported.

Connect the Router LAN Port to NVR WAN Port with Network Cable Provided.

NOTE:

Antenna already has been screwed into the camera, please DO NOT unscrew it.

Otherwise camera will be broken.

The router must be WAN(Wide Area Network).

If needed, please be free to watch the video about how to connect the system below:

https://www.dropbox.com/s/fkjfm2qcpdug1nx/Connection.mp4?dl=0

12V/2A

Installing the System