User Guide

13
Q:Do I need to connect the camera with network cable?
A:
No, the cameras are wireless. You do, however, need to connect the camera with
a power supply. The cameras and NVR are already paired. The camera will connect
with the NVR automatically once attached to a power supply. Do not attempt to install
your cameras until you are able to view images on your TV or PC monitor first.
Q:How can I troubleshoot camera issues?
A:First check to see if the power adapter is working by testing with another power
adapter. lf the power adapter is functioning, move the camera close to NVR box to
check whether you have video or not. lf there is no video, cover the photocell with
your finger as shown in the figure below. If the IR-CUT light turns red, the camera is
working. If it does not turn red, this indicates that the camera has experienced a
malfunction.In this case,please contact us for after sale service.
Q:How can I get motion notifications on my Smartphone?
A:
First verify that the Network Status
indicates Healthy Network (refer to section 2). Next, from the home screen of your
monitor, right click the mouse, navigate to System setup > Channel Setup > Video
detection. Next, select the following: Enable for Motion Detection, Alarm, E-mail
Notice and APP Alarm. Click Ok.
Cover the
photocell