User Guide

Backup Video
7
Motion detection
8
11
Then remove your mouse directly and insert USB storage in one
minute,then wait for the system to perform the back-up.
From the home screen of monitor, right click the mouse, navigate to Video
backup, select Channel.
Or on the Video playback page, select date, channels, select certain time, then
click Search and select the files you want to back up, click Backup.
1) Right click the mouse on home screen of monitor, navigate to System
setup>Channel setup>Video detection, set motion detection, set Arming Time and
Area Edit, untick Alarm, E-mail Notice and App Alarm, untick Buzzer(if tick, NVR
will make beeping sound when motion being detected), then click OK and local
test if it is successfully set up. Move around in front of camera, if a little yellow man
shows up on monitor, it means successfully set up.
2) Go to mobile App, select Me>Alarm setting>enable Notifications. Then you
can access to phone App alerts. When motion being detected, an alarm message
shows in Notifications:please refer to FAQ about how to get mobile notification
when motion detection.